                              LOGPlus!
                             DMW Systems                         
                       Robert A. Winters/KD7P                       
                          kd7p@seanet.com

   Table of Content
   =-=-=-=-=-=-=-=-
   1.  Welcome to LOGPlus! Version 3
   2.  80386/80286 and 80286 Versions of LOGPlus!
   3.  DEMO Users

   Welcome to LOGPlus! Version 3
   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
   Once you've completed the installation, please print and read the
   documentation before attempt to run LOGPlus!.   Even  though  the
   program  will run, it may have difficulties because modifications
   to your  CONFIG.SYS  and  AUTOEXEC.BAT  files  are required.  The
   documentation will explain this as well as give you a  wealth  of
   information  on  what LOGPlus!  can do.  This version of LOGPlus!
   has hundreds of changes which I'm sure you'll enjoy.
   
   Thank you for purchasing  LOGPlus!,  I'm sure you'll be extremely
   happy you went this route over any of the others.  Remember,  if
   you  experience  ANY  difficulties or have suggestions to improve
   LOGPlus!, please contact me via the LOGPlus! BBS at (360) 653-9652,
   internet:  kd7p@seanet.com or via mail:

   Bob Winters, KD7P
   9909 121st Ave N.E.
   Lake Stevens, Washington 98258

   Voice:  (360) 653-8304 After 6PM West Coast Time

   80386/80286 and 80286 Version of LOGPlus!
   =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
   This diskette contains the 80386/80286 version of LOGPlus! which should
   work on nearly all 80386 and 80286 computers. If difficulties arise 
   during the execution of the program, (BLX 286 ERROR 1313) this
   indicate your system has difficulties running in a dual mode
   configuration.

   You can obtain the 80286 version from the LOGPlus! BBS at 
   (360) 653-9652 or requesting a copy via mail. If requesting a copy 
   via mail, please return your original disk along with a note 
   explaining your needs.

   Note:  The only differences between the 80386/80286 and 80286 version
   is the method inwhich the programs were linked/compiled.  All features
   in the 80386/80286 version are the exact same in the 80286 version.

   DEMO Users
   =-=-=-=-=-
   The DEMO version of LOGPlus! will allow you to enter up to 100 QSOs.
   If you decided to purchase the program afterwards, updating to the
   released version is extremely simple.  Data which you've entered will
   NOT be lost unless you decided to re-install the program.

   The program MUST be located in the directory \PLUSV3 off the root.
   In addition, a sub-directory called \NOTES must be created in the
   \PLUSV3 directory.

            C:\PLUSV3\
            C:\PLUSV3\NOTES

   To access the program, you must use:            LOG DEMO

