#!/bin/sh

#
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/Xinstall.sh,v 1.18 2000/12/15 03:01:45 dawes Exp $
#
# Copyright © 2000 by Precision Insight, Inc.
# Copyright © 2000 by VA Linux Systems, Inc.
# Portions Copyright © 1996-2000 by The XFree86 Project, Inc.
#
# This script should be used to install XFree86 4.0.2.
#
# Parts of this script are based on the old preinst.sh and postinst.sh
# scripts.
#
# Set tabs to 4 spaces to view/edit this file.
#
# Authors:	David Dawes <dawes@xfree86.org>
#

VERSION=4.0.2

RUNDIR=/usr/X11R6
ETCDIR=/etc/X11
VARDIR=/var

if [ X"$1" = "X-test" -o X"$XINST_TEST" != X ]; then
	RUNDIR=/home1/test/X11R6
	ETCDIR=/home1/test/etcX11
	VARDIR=/home1/test/var
	if [ X"$1" = "X-test" ]; then
		shift
	fi
	echo ""
	echo "Running in test mode"
fi

OLDFILES=""

OLDDIRS=" \
	$RUNDIR/lib/X11/xkb/compiled \
	"

OLDMODULES=" \
	xie.so \
	pex5.so \
	glx.so \
	"

BASEDIST=" \
	Xbin.tgz \
	Xlib.tgz \
	Xman.tgz \
	Xdoc.tgz \
	Xfnts.tgz \
	Xfenc.tgz \
	"

ETCDIST="Xetc.tgz"

VARDIST=""

SERVDIST=" \
	Xxserv.tgz \
	Xmod.tgz \
	"
OPTDIST=" \
	Xfsrv.tgz \
	Xnest.tgz \
	Xprog.tgz \
	Xprt.tgz \
	Xvfb.tgz \
	Xf100.tgz \
	Xfcyr.tgz \
	Xflat2.tgz \
	Xfnon.tgz \
	Xfscl.tgz \
	Xhtml.tgz \
	Xjdoc.tgz \
	Xps.tgz \
	"

ETCLINKS=" \
	app-defaults \
	fs \
	lbxproxy \
	proxymngr \
	rstart \
	twm \
	xdm \
	xinit \
	xsm \
	xserver \
	"

XKBDIR="/etc/X11/xkb"

FONTDIRS=" \
	local \
	misc
	"

WDIR=`pwd`

# Check how to suppress newlines with echo (from perl's Configure)
((echo "xxx\c"; echo " ") > .echotmp) 2> /dev/null
if [ ! -f .echotmp ]; then
	echo "Can't write to the current directory.  Aborting";
	exit 1
fi
if grep c .echotmp >/dev/null 2>&1; then
	n='-n'
	c=''
else
	n=''
	c='\c'
fi
rm -f .echotmp

Echo()
{
	echo $n "$@""$c"
}

ContinueNo()
{
	Echo "Do you wish to continue? (y/n) [n] "
	read response
	case "$response" in
	[yY]*)
		echo ""
		;;
	*)
		echo "Aborting the installation."
		exit 2
		;;
	esac
}

ContinueYes()
{
	Echo "Do you wish to continue? (y/n) [y] "
	read response
	case "$response" in
	[nN]*)
		echo "Aborting the installation."
		exit 2
		;;
	*)
		echo ""
		;;
	esac
}

Description()
{
	case $1 in
	Xfsrv*)
		echo "font server";;
	Xnest*)
		echo "Nested X server";;
	Xprog*)
		echo "programmer support";;
	Xprt*)
		echo "X print server";;
	Xvfb*)
		echo "Virtual framebuffer X server";;
	Xf100*)
		echo "100dpi fonts";;
	Xfcyr*)
		echo "Cyrillic fonts";;
	Xflat2*)
		echo "Latin-2 fonts";;
	Xfnon*)
		echo "Some large fonts";;
	Xfscl*)
		echo "Scaled fonts (Speedo and Type1)";;
	Xhtml*)
		echo "Docs in HTML";;
	Xjdoc*)
		echo "Docs in Japanese";;
	Xps*)
		echo "Docs in PostScript";;
	*)
		echo "unknown";;
	esac
}

ReadLink()
{
	rltmp="`ls -l $1`"
	rl=`expr "$rltmp" : '.*-> \([^ 	]*\)'`
	echo $rl
}

GetOsInfo()
{
	echo "Checking which OS you're running..."

	OsName="`uname`"
	OsVersion="`uname -r`"
	case "$OsName" in
	SunOS) # Assumes SunOS 5.x
		OsArch="`uname -p`"
		;;
	*)
		OsArch="`uname -m`"
		;;
	esac
	# Some SVR4.0 versions have a buggy uname that reports the node name
	# for the OS name.  Try to catch that here.  Need to check what is
	# reported for non-buggy versions.
	if [ "$OsName" = "`uname -n`" -a -f /stand/unix ]; then
		OsName=UNIX_SV
	fi
	echo "uname reports '$OsName' version '$OsVersion', architecture '$OsArch'."

	# Find the object type, where needed

	case "$OsName" in
	Linux|FreeBSD|NetBSD)
		if file -L /bin/sh | grep ELF > /dev/null 2>&1; then
			OsObjFormat=ELF
		else
			OsObjFormat=a.out
		fi
		;;
	esac

	if [ X"$OsObjFormat" != X ]; then
		Echo "Object format is '$OsObjFormat'.  "
		needNL=YES
	fi

	# test's flag for symlinks
	#
	# For OSs that don't support symlinks, choose a type that is guaranteed to
	# return false for regular files and directories.

	case "$OsName" in
	FreeBSD)
		case "$OsVersion" in
		2.*)
			L="-h"
			;;
		*)
			L="-L"
			;;
		esac
		;;
	SunOS)
		L="-h"				# /bin/sh built-in doesn't do -L
		;;
	OS-with-no-symlinks)	# Need to set this correctly
		L="-b"
		NoSymlinks=YES
		;;
	*)
		L="-L"
		;;
	esac

	# Find the libc version, where needed
	case "$OsName" in
	Linux)
		tmp="`ldd /bin/sh | grep libc.so 2> /dev/null`"
		LibcPath=`expr "$tmp" : '[^/]*\(/[^ ]*\)'`
		tmp="`strings $LibcPath | grep -i 'c library'`"
		OsLibcMajor=`expr "$tmp" : '.* \([0-9][0-9]*\)'`
		OsLibcMinor=`expr "$tmp" : '.* [0-9][0-9]*\.\([0-9][0-9]*\)'`
		OsLibcTeeny=`expr "$tmp" : '.* [0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\)'`
		case "$OsLibcMajor" in
		2)
			# 2 is the glibc version
			OsLibcMajor=6
			;;
		esac
		;;
	esac

	if [ X"$OsLibcMajor" != X ]; then
		Echo "libc version is '$OsLibcMajor"
		if [ X"$OsLibcMinor" != X ]; then
			Echo ".$OsLibcMinor"
			if [ X"$OsLibcTeeny" != X ]; then
				Echo ".$OsLibcTeeny"
				if [ $OsLibcTeeny -gt 80 ]; then
					OsLibcMinor=`expr $OsLibcMinor + 1`
				fi
			fi
			Echo "'"
			Echo " ($OsLibcMajor.$OsLibcMinor)"
		else
			Echo "'"
		fi
		echo "."
	fi
#	if [ X"$needNL" = XYES ]; then
#		echo ""
#	fi
	echo ""
}

DoOsChecks()
{
	# Do some OS-specific checks

	case "$OsName" in
	Linux)
		case "$OsObjFormat" in
		ELF)
			# Check ldconfig
			LDSO=`/sbin/ldconfig -v -n | awk '{ print $3 }'`
			# if LDSO is empty ldconfig may be Version 2
			if [ X"$LDSO" = X ]; then
				LDSO=`/sbin/ldconfig -V | awk 'NR == 1 { print $4 }'`
			fi
			LDSOMIN=`echo $LDSO | awk -F[.-] '{ print $3 }'`
			LDSOMID=`echo $LDSO | awk -F[.-] '{ print $2 }'`
			LDSOMAJ=`echo $LDSO | awk -F[.-] '{ print $1 }'`
			if [ "$LDSOMAJ" -gt 1 ]; then
				: OK
			else
				if [ "$LDSOMID" -gt 7 ]; then
					: OK
				else
					if [ "$LDSOMIN" -ge 14 ]; then
						: OK
					else
						echo ""
						echo "Before continuing, you will need to get a"
						echo "current version of ld.so.  Version 1.7.14 or"
						echo "newer will do."
						NEEDSOMETHING=YES
					fi
				fi
			fi
			;;
		esac
		# The /dev/tty0 check is left out.  Presumably nobody has a system where
		# this is missing any more.
		;;
	esac
}

FindDistName()
{
	case "$OsName" in
	Darwin)
		case "$OsArch" in
		Power*)
			case "$OsVersion" in
			1.[2-9])
				DistName="Darwin"
				;;
			*)
				Message="No Darwin binaries available for this OS version"
				;;
			esac
			;;
		*)
			Message="Darwin binaries are only available for Power Mac platforms"
			;;
		esac
		;;
	DGUX)	# Check this string
		case "$OsArch" in
		i*86)
			DistName="DGUX-ix86"
			;;
		*)
			Message="DGUX binaries are only available for ix86 platforms"
			;;
		esac
		;;
	FreeBSD)
		case "$OsArch" in
		i386)
			case "$OsVersion" in
			2.2*)
				DistName="FreeBSD-2.2.x"
				;;
			3.*)
				case "$OsObjFormat" in
				ELF)
					DistName="FreeBSD-3.x"
					;;
				*)
					Message="FreeBSD 3.x binaries are only available in ELF format"
					;;
				esac
				;;
			4.*)
				DistName="FreeBSD-4.x"
				;;
			*)
				Message="FreeBSD/i386 binaries are not available for this version"
				;;
			esac
			;;
		alpha)
			case "$OsVersion" in
			3.*)
				DistName="FreeBSD-alpha-3.x"
				;;
			4.*)
				DistName="FreeBSD-alpha-4.x"
				;;
			*)
				Message="FreeBSD/alpha binaries are not available for this version"
				;;
			esac
			;;
		*)
			Message="FreeBSD binaries are not available for this architecture"
			;;
		esac
		;;
	Linux)
		case "$OsArch" in
		i*86)
			case "$OsLibcMajor" in
			5)
				DistName="Linux-ix86-libc5"
				;;
			6)
				case "$OsLibcMinor" in
				0)
					DistName="Linux-ix86-glibc20"
					;;
				1)
					DistName="Linux-ix86-glibc21"
					;;
				2)
					DistName="Linux-ix86-glibc22"
					;;
				*)
					Message="No dist available for glibc 2.$OsLibcMinor.  Try Linux-ix86-glibc22"
					;;
				esac
				;;
			*)
				case "$OsObjFormat" in
				a.out)
					Message="Linux a.out is no longer supported"
					;;
				*)
					Message="No Linux/ix86 binaries for this libc version"
					;;
				esac
				;;
			esac
			;;
		alpha)
			case "$OsLibcMajor.$OsLibcMinor" in
			6.1)
				DistName="Linux-alpha-glibc21"
				;;
			6.*)
				Message="No Linux/alpha binaries for glibc 2.$OsLibcMinor.  Try Linux-alpha-glibc21"
				;;
			*)
				Message="No Linux/alpha binaries for this libc version"
				;;
			esac
			;;
		mips)
			case "$OsLibcMajor.$OsLibcMinor" in
			6.0)
				DistName="Linux-mips-glibc20"
				;;
			*)	
				Message="No Linux/Mips binaries for this libc version"
				;;
			esac
			;;
		*)
			Message="No Linux binaries available for this architecture"
			;;
		esac
		;;
	LynxOS)	# Check this
		DistName="LynxOS"
		;;
	NetBSD)
		case "$OsArch" in
		i386)
			case "$OsVersion" in
			1.[4-9]*)	# Check this
				case "$OsObjFormat" in
				a.out)
					DistName="NetBSD-1.4.1"
					;;
				*)
					DistName="NetBSD-1.5"
					;;
				esac
				;;
			*)
				Message="No NetBSD/i386 binaries available for this version"
				;;
			esac
			;;
		*)
			Message="No NetBSD binaries available for this architecture"
			;;
		esac
		;;
	OpenBSD)
		case "$OsArch" in
		i386)
			case "$OsVersion" in
			2.[89]*)	# Check this
				DistName="OpenBSD-2.8"
				;;
			*)
				Message="No OpenBSD/i386 binaries available for this version"
				;;
			esac
			;;
		*)
			Message="No OpenBSD binaries available for this architecture"
			;;
		esac
		;;
	SunOS)
		case "$OsArch" in
		i386)
			case "$OsVersion" in
			5.[67]*)
				DistName="Solaris"
				;;
			5.8*)
				DistName="Solaris-8"
				;;
			*)
				Message="No Solaris/x86 binaries available for this version"
				;;
			esac
			;;
		*)
			Message="No SunOS/Solaris binaries available for this architecture"
			;;
		esac
		;;
	UNIX_SV)
		case "$OsArch" in
		i386)
			case "$OsVersion" in
			4.0*)
				DistName="SVR4.0"
				;;
			*)
				# More detailed version check??
				DistName="UnixWare"
				;;
			esac
			;;
		*)
			Message="No SYSV binaries available for this architecture"
			;;
		esac
		;;
	*)
		Message="No binaries available for this OS"
		;;
	esac

	if [ X"$DistName" != X ]; then
		echo "Binary distribution name is '$DistName'"
		echo ""
	else
		if [ X"$Message" = X ]; then
			echo "Can't find which binary distribution you should use."
			echo "Please send the output of this script to XFree86@XFree86.org"
			echo ""
		else
			echo "$Message"
			echo ""
		fi
	fi
}

if [ X"$1" = "X-check" ]; then
	GetOsInfo
	FindDistName
	exit 0
fi

echo ""
echo "		Welcome to the XFree86 $VERSION installer"
echo ""
echo "You are strongly advised to backup your existing XFree86 installation"
echo "before proceeding.  This includes the /usr/X11R6 and /etc/X11"
echo "directories.  The installation process will overwrite existing files"
echo "in those directories, and this may include some configuration files"
echo "that may have been customised."
echo ""
ContinueNo

# Should check if uid is zero

# Check if $DISPLAY is set, and warn

if [ X"$DISPLAY" != X ]; then
	echo "\$DISPLAY is set, which may indicate that you are running this"
	echo "installation from an X session.  It is recommended that X not be"
	echo "running while doing the installation."
	echo ""
	ContinueNo
fi

# First, do some preliminary checks

GetOsInfo

# Make OS-specific adjustments

case "$OsName" in
Darwin)
	SERVDIST="Xxserv.tgz"
	;;
FreeBSD|NetBSD|OpenBSD)
	VARDIST="Xvar.tgz"
	XKBDIR="/var/db/xkb"
	;;
Interactive)	# Need the correct name for this
	EXTRADIST="Xbin1.tgz"
	EXTRAOPTDIST="Xxdm.tgz"
	;;
Linux)
	VARDIST="Xvar.tgz"
	XKBDIR="/var/state/xkb"
	;;
esac

REQUIREDFILES=" \
	extract \
	$BASEDIST \
	$ETCDIST \
	$VARDIST \
	$SERVDIST \
	$EXTRADIST \
	"

echo "Checking for required files ..."
Needed=""

# Check for extract and extract.exe, and check that they are usable.
#
# This test may not be fool-proof.  A FreeBSD/ELF binary downloaded in
# ASCII mode passed it :-(.
#
if [ -f extract ]; then
	ExtractExists=YES
	chmod +x extract
	if ./extract --version | head -1 | \
	  fgrep "extract (XFree86 version" > /dev/null 2>&1; then
		ExtractOK=YES
	else
		echo "extract doesn't work properly, renaming it to 'extract.bad'"
		rm -f extract.bad
		mv extract extract.bad
	fi
fi
if [ X"$ExtractOK" != XYES ]; then
	if [ -f extract.exe ]; then
		ExtractExeExists=YES
		rm -f extract
		ln extract.exe extract
		chmod +x extract
		if ./extract --version | head -1 | \
		  fgrep "extract (XFree86 version" > /dev/null 2>&1; then
			ExtractOK=YES
		else
			echo "extract.exe doesn't work properly, renaming it to"
			echo "'extract.exe.bad'"
			rm -f extract.exe.bad
			mv extract.exe extract.exe.bad
			rm -f extract
		fi
	fi
fi
if [ X"$ExtractOK" != XYES ]; then
	echo ""
	if [ X"$ExtractExists" = XYES -a X"$ExtractExeExists" = XYES ]; then
		echo "The versions of 'extract' and 'extract.exe' you have do not run'"
		echo "correctly.  Make sure that you have downloaded the correct"
		echo "binaries for your system.  To find out which is correct,"
		echo "run 'sh $0 -check'."
	fi
	if [ X"$ExtractExists" = XYES -a X"$ExtractExeExists" != XYES ]; then
		echo "The version of 'extract' you have does not run correctly."
		echo "This is most commonly due to problems downloading this file"
		echo "with some web browsers.  You may get better results if you"
		echo "download the version called 'extract.exe' and try again."
	fi
	if [ X"$ExtractExists" != XYES -a X"$ExtractExeExists" = XYES ]; then
		echo "The version of 'extract.exe' you have does not run correctly."
		echo "Make sure that you have downloaded the correct binaries for your"
		echo "system.  To find out which is correct, run 'sh $0 -check'."
	fi
	if [ X"$ExtractExists" != XYES -a X"$ExtractExeExists" != XYES ]; then
		echo "You need to download the 'extract' (or 'extract.exe') utility"
		echo "and put it in this directory."
	fi
	echo ""
	echo "When you have corrected the problem, please re-run 'sh $0'"
	echo "to proceed with the installation."
	echo ""
	exit 1
fi

for i in $REQUIREDFILES; do
	if [ ! -f $i ]; then
		Needed="$Needed $i"
	fi
done
if [ X"$Needed" != X ]; then
	echo ""
	echo "The files:"
	echo ""
	echo "$Needed"
	echo ""
	echo "must be present in the current directory to proceed with the"
	echo "installation.  You should be able to find it at the same place"
	echo "you picked up the rest of the XFree86 binary distribution."
	echo "Please re-run 'sh $0' to proceed with the installation when"
	echo "you have them."
	echo ""
	exit 1
fi

DoOsChecks

if [ X"$NEEDSOMETHING" != X ]; then
	echo ""
	echo "Please re-run 'sh $0' to proceed with the installation after you"
	echo "have made the required updates."
	echo ""
	exit 1
fi

echo ""

# Link extract to gnu-tar so it can also be used as a regular tar
rm -f gnu-tar
ln extract gnu-tar

EXTRACT=$WDIR/extract
TAR=$WDIR/gnu-tar

# Create $RUNDIR and $ETCDIR if they don't already exist

if [ ! -d $RUNDIR ]; then
	NewRunDir=YES
	echo "Creating $RUNDIR"
	mkdir $RUNDIR
fi
if [ ! -d $RUNDIR/lib ]; then
	echo "Creating $RUNDIR/lib"
	mkdir $RUNDIR/lib
fi
if [ ! -d $RUNDIR/lib/X11 ]; then
	echo "Creating $RUNDIR/lib/X11"
	mkdir $RUNDIR/lib/X11
fi
if [ ! -d $ETCDIR ]; then
	NewEtcDir=YES
	echo "Creating $ETCDIR"
	mkdir $ETCDIR
fi

if [ -d $RUNDIR -a -d $RUNDIR/bin -a -d $RUNDIR/lib ]; then
	echo ""
	echo "You appear to have an existing installation of X.  Continuing will"
	echo "overwrite it.  You will, however, have the option of being prompted"
	echo "before most configuration files are overwritten."
	ContinueYes
fi

if [ X"$OLDFILES" != X ]; then
	echo ""
	echo "Removing some old files that are no longer required..."
	for i in $OLDFILES; do
		if [ -f $i ]; then
			echo "	removing old file $i"
			rm -f $i
		fi
	done
	echo ""
fi

if [ X"$OLDDIRS" != X ]; then
	echo ""
	echo "Removing some old directories that are no longer required..."
	for i in $OLDDIRS; do
		if [ -d $i ]; then
			echo "	removing old directory $i"
			rm -fr $i
		fi
	done
	echo ""
fi

if [ ! -d $RUNDIR/lib/X11/xkb ]; then
	echo "Creating $RUNDIR/lib/X11/xkb"
	mkdir $RUNDIR/lib/X11/xkb
fi
# Check for config file directories that may need to be moved.

EtcToMove=
if [ X"$NoSymLinks" != XYES ]; then
	for i in $ETCLINKS; do
		if [ -d $RUNDIR/lib/X11/$i -a ! $L $RUNDIR/lib/X11/$i ]; then
			EtcToMove="$EtcToMove $i"
		fi
	done
fi

if [ X"$EtcToMove" != X ]; then
	echo "XFree86 now installs most customisable configuration files under"
	echo "$ETCDIR instead of under $RUNDIR/lib/X11, and has symbolic links"
	echo "under $RUNDIR/lib/X11 that point to $ETCDIR.  You currently have"
	echo "files under the following subdirectories of $RUNDIR/lib/X11:"
	echo ""
	echo "$EtcToMove"
	echo ""
	echo "Do you want to move them to $ETCDIR and create the necessary"
	Echo "links? (y/n) [y] "
	read response
	case "$response" in
	[nN]*)
		echo ""
		echo "Note: this means that your run-time config files will remain"
		echo "in the old $RUNDIR/lib/X11 location."
		NoSymLinks=YES;
		;;
	esac
	echo ""
	if [ X"$NoSymLinks" != XYES ]; then
		for i in $EtcToMove; do
			echo "Moving $RUNDIR/lib/X11/$i to $ETCDIR/$i ..."
			if [ ! -d $ETCDIR/$i ]; then
				mkdir $ETCDIR/$i
			fi
			$TAR -C $RUNDIR/lib/X11/$i -c -f - . | \
				$TAR -C $ETCDIR/$i -v -x -p -U -f - && \
				rm -fr $RUNDIR/lib/X11/$i && \
				ln -s $ETCDIR/$i $RUNDIR/lib/X11/$i
		done
	fi
fi

# Maybe allow a backup of the config files to be made?

# Extract Xetc.tgz into a temporary location, and prompt for moving the
# files.

echo "Extracting $ETCDIST into a temporary location ..."
rm -fr .etctmp
mkdir .etctmp
(cd .etctmp; $EXTRACT $WDIR/$ETCDIST)
for i in $ETCLINKS; do
	DoCopy=YES
	if [ -d $RUNDIR/lib/X11/$i ]; then
		Echo "Do you want to overwrite the $i config files? (y/n) [n] "
		read response
		case "$response" in
		[yY]*)
			: OK
			;;
		*)
			DoCopy=NO
			;;
		esac
	fi
	if [ $DoCopy = YES ]; then
		echo "Installing the $i config files ..."
		if [ X"$NoSymLinks" != XYES ]; then
			if [ ! -d $ETCDIR/$i ]; then
				mkdir $ETCDIR/$i
			fi
			if [ ! -d $RUNDIR/lib/X11/$i ]; then
				ln -s $ETCDIR/$i $RUNDIR/lib/X11/$i
			fi
		else
			if [ ! -d $RUNDIR/lib/X11/$i ]; then
				mkdir $RUNDIR/lib/X11/$i
			fi
		fi
		$TAR -C .etctmp/$i -c -f - . | \
			$TAR -C $RUNDIR/lib/X11/$i -v -x -p -U -f -
	fi
done
if [ X"$XKBDIR" != X ]; then
	rm -fr $RUNDIR/lib/X11/xkb/compiled
	if [ X"$NoSymLinks" = XYES ]; then
		XKBDIR=$RUNDIR/lib/X11/xkb/compiled
	fi
	if [ -d .etctmp/xkb ]; then
		mkdir $XKBDIR
		$TAR -C .etctmp/xkb -c -f - . | \
			$TAR -C $XKBDIR -v -x -p -U -f -
	fi
fi
rm -fr .etctmp

echo ""
echo "Installing the mandatory parts of the binary distribution"
echo ""
for i in $BASEDIST $SERVDIST; do
	(cd $RUNDIR; $EXTRACT $WDIR/$i)
done
if [ X"$VARDIST" != X ]; then
	(cd $VARDIR; $EXTRACT $WDIR/$VARDIST)
fi

if [ X"$XKBDIR" != X -a X"$XKBDIR" != X"$RUNDIR/lib/X11/xkb/compiled" ]; then
	rm -fr $RUNDIR/lib/X11/xkb/compiled
	ln -s $XKBDIR $RUNDIR/lib/X11/xkb/compiled
fi

echo "Checking for optional components to install ..."
for i in $OPTDIST $EXTRAOPTDIST; do
	if [ -f $i ]; then
		Echo "Do you want to install $i (`Description $i`)? (y/n) [y] "
		read response
		case "$response" in
		[nN]*)
			: skip this one
			;;
		*)
			(cd $RUNDIR; $EXTRACT $WDIR/$i)
			;;
		esac
	fi
done

# Need to run ldconfig on some OSs
case "$OsName" in
FreeBSD|NetBSD|OpenBSD)
	echo ""
	echo "Running ldconfig"
	/sbin/ldconfig -m $RUNDIR/lib
	;;
Linux)
	echo ""
	echo "Running ldconfig"
	/sbin/ldconfig $RUNDIR/lib
	;;
esac

# Run mkfontdir in the local and misc directories to make sure that
# the fonts.dir files are up to date after the installation.
echo ""
for i in $FONTDIRS $EXTRAFONTDIRS; do
	if [ -d $RUNDIR/lib/X11/fonts/$i ]; then
		Echo "Updating the fonts.dir file in $RUNDIR/lib/X11/fonts/$i..."
		$RUNDIR/bin/mkfontdir $RUNDIR/lib/X11/fonts/$i
		echo ""
	fi
done
		
# Check if the system has a termcap file
TERMCAP1DIR=/usr/share
TERMCAP2=/etc/termcap
if [ -d $TERMCAP1DIR ]; then
	TERMCAP1=`find $TERMCAP1DIR -type f -name termcap -print 2> /dev/null`
	if [ x"$TERMCAP1" != x ]; then
		TERMCAPFILE="$TERMCAP1"
	fi
fi
if [ x"$TERMCAPFILE" = x ]; then
	if [ -f $TERMCAP2 ]; then
		TERMCAPFILE="$TERMCAP2"
	fi
fi

# Override this for some OSs

case "$OsName" in
OpenBSD)
	TERMCAPFILE=""
	;;
esac

if [ X"$TERMCAPFILE" != X ]; then
	echo ""
	echo "You appear to have a termcap file: $TERMCAPFILE"
	echo "This should be edited manually to replace the xterm entries"
	echo "with those in $RUNDIR/lib/X11/etc/xterm.termcap"
	echo ""
	echo "Note: the new xterm entries are required to take full advantage"
	echo "of new features, but they may cause problems when used with"
	echo "older versions of xterm.  A terminal type 'xterm-r6' is included"
	echo "for compatibility with the standard X11R6 version of xterm."
fi

# Check for terminfo, and update the xterm entry
TINFODIR=/usr/lib/terminfo
# Does this list need to be updated?
OLDTINFO=" \
	x/xterm \
	x/xterms \
	x/xterm-24 \
	x/xterm-vi \
	x/xterm-65 \
	x/xterm-bold \
	x/xtermm \
	x/xterm-boldso \
	x/xterm-ic \
	x/xterm-r6 \
	x/xterm-old \
	x/xterm-r5 \
	v/vs100"
	
if [ -d $TINFODIR ]; then
	echo ""
	echo "You appear to have a terminfo directory: $TINFODIR"
	echo "New xterm terminfo entries can be installed now."
	echo ""
	echo "Note: the new xterm entries are required to take full advantage"
	echo "of new features, but they may cause problems when used with"
	echo "older versions of xterm.  A terminal type 'xterm-r6' is included"
	echo "for compatibility with the standard X11R6 version of xterm."
	echo ""
	echo "Do you wish to have the new xterm terminfo entries installed"
	Echo "now (y/n)? [n] "
	read response
	case "$response" in
	[yY]*)
		echo ""
		for t in $OLDTINFO; do
			if [ -f $TINFODIR/$t ]; then
				echo "Moving old terminfo file $TINFODIR/$t to $TINFODIR/$t.bak"
				rm -f $TINFODIR/$t.bak
				mv -f $TINFODIR/$t $TINFODIR/$t.bak
			fi
		done
		echo ""
		echo "Installing new terminfo entries for xterm."
		echo ""
		echo "On some systems you may get warnings from tic about 'meml'"
		echo "and 'memu'.  These warnings can safely be ignored."
		echo ""
		tic $RUNDIR/lib/X11/etc/xterm.terminfo
		;;
	*)
		echo ""
		echo "Not installing new terminfo entries for xterm."
		echo "They can be installed later by running:"
		echo ""
		echo "  tic $RUNDIR/lib/X11/etc/xterm.terminfo"
		;;
	esac
fi

if [ -f $RUNDIR/lib/libGL.so ]; then
	existing=""
	if [ -f /usr/lib/libGL.so ]; then
		existing="$existing /usr/lib/libGL.so"
	fi
	if [ -f /usr/lib/libGL.so.1 ]; then
		existing="$existing /usr/lib/libGL.so.1"
	fi
	if [ -d /usr/include/GL ]; then
		existing="$existing /usr/include/GL"
	fi
	echo ""
	echo "On some platforms (e.g., Linux), the OpenGL standard requires"
	echo "that the GL shared library and header files be visible from the"
	echo "standard system lib and include directories (/usr/lib and"
	echo "/usr/include).  This can be done by installing links in those"
	echo "directories to the files that have been installed under $RUNDIR."
	echo ""
	echo "NOTE: installing these links will overwrite existing files or"
	echo "links."
	if [ X"$existing" != X ]; then
		echo ""
		echo "The follwing links/files/directories already exist:"
		echo ""
		ls -ld $existing
	fi
	echo ""
	Echo "Do you wish to have the (new) links installed (y/n)? [n] "
	read response
	case "$response" in
	[yY]*)
		rm -f /usr/lib/libGL.so
		if [ ! -f /usr/lib/libGL.so ]; then
			echo "Creating link from $RUNDIR/lib/libGL.so to /usr/lib/libGL.so"
			ln -s $RUNDIR/lib/libGL.so /usr/lib/libGL.so
		else
			echo "Could not remove existing /usr/lib/libGL.so, so the new"
			echo "link has not been created."
		fi
		rm -f /usr/lib/libGL.so.1
		if [ ! -f /usr/lib/libGL.so.1 ]; then
			echo "Creating link from $RUNDIR/lib/libGL.so.1 to /usr/lib/libGL.so.1"
			ln -s $RUNDIR/lib/libGL.so.1 /usr/lib/libGL.so.1
		else
			echo "Could not remove existing /usr/lib/libGL.so.1, so the new"
			echo "link has not been created."
		fi
		if [ -d $RUNDIR/include/GL ]; then
			rm -f /usr/include/GL
			if [ ! -d /usr/include/GL ]; then
				echo "Creating link from $RUNDIR/include/GL to /usr/include/GL"
				ln -s $RUNDIR/include/GL /usr/include/GL
			else
				echo "Could not remove existing /usr/include/GL, so the new"
				echo "link has not been created."
			fi
		fi
		;;
	esac
fi

if [ -f $RUNDIR/bin/rstartd ]; then
	echo ""
	echo "If you are going to use rstart and $RUNDIR/bin isn't in the"
	echo "default path for commands run remotely via rsh, you will need"
	echo "a link to rstartd installed in /usr/bin."
	echo ""
	Echo "Do you wish to have this link installed (y/n)? [n] "
	read response
	case "$response" in
	[yY]*)
		echo "Creating link from $RUNDIR/bin/rstartd to /usr/bin/rstartd"
		rm -f /usr/bin/rstartd
		ln -s $RUNDIR/bin/rstartd /usr/bin/rstartd
		;;
	esac
fi

# Finally, check for old 3.3.x modules that will conflict with 4.x
if [ -d $RUNDIR/lib/modules ]; then
	for i in $OLDMODULES; do
		if [ -f $RUNDIR/lib/modules/$i ]; then
			ModList="$ModList $i"
		fi
	done
	if [ X"$ModList" != X ]; then
		echo ""
		echo "The following 3.3.x X server modules were found in"
		echo "$RUNDIR/lib/modules, and they may cause problems when running"
		echo "$VERSION:"
		echo ""
		echo "  $ModList"
		echo ""
		echo "Do you want them moved to $RUNDIR/lib/modules/old?"
		echo "Note: that if you want to use them with 3.3.x again, you'll"
		Echo "need to move them back manually. (y/n) [n] "
		read response
		case "$response" in
		[yY]*)
			if [ ! -d $RUNDIR/lib/modules/old ]; then
				echo ""
				echo "Creating $RUNDIR/lib/modules/old"
				mkdir $RUNDIR/lib/modules/old
			else
				echo ""
			fi
			if [ -d $RUNDIR/lib/modules/old ]; then
				for i in $ModList; do
					echo "Moving $i to $RUNDIR/lib/modules/old"
					mv $RUNDIR/lib/modules/$i $RUNDIR/lib/modules/old/$i
				done
			else
				echo "Failed to create directory $RUNDIR/lib/modules/old"
			fi
			;;
		*)
			echo ""
			echo "Make sure that you rename, move or delete the old modules"
			echo "before running $VERSION."
		esac
	fi
	# Some distributions have old codeconv modules
	if [ -d $RUNDIR/lib/modules/codeconv ]; then
		if [ -f $RUNDIR/lib/modules/codeconv/ISO8859_1.so ]; then
			echo ""
			echo "Warning: it looks like there are some old *.so modules"
			echo "in $RUNDIR/lib/modules/codeconv.  You may need to rename,"
			echo "move or delete them if you use the xtt font module."
		fi
	fi
fi

echo ""
echo "Installation complete."

exit 0
### Local Variables: 	***
### tab-width: 4 		***
### End:				***