/* $NetBSD: bcm53xx_reg.h,v 1.19.4.1 2024/02/16 12:07:08 skrll Exp $ */ /*- * Copyright (c) 2012 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Matt Thomas of 3am Software Foundry. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _ARM_BROADCOM_BCM53XX_REG_H_ #define _ARM_BROADCOM_BCM53XX_REG_H_ /* * 0x0000_0000..0x07ff_ffff 128MB DDR2/3 DRAM Memory Region (dual map) * 0x0800_0000..0x0fff_ffff 128MB PCIe 0 Address Match Region * 0x1800_0000..0x180f_ffff 1MB Core Register Region * 0x1810_0000..0x181f_ffff 1MB IDM Register Region * 0x1900_0000..0x190f_ffff 1MB ARMcore (CORTEX-A9) Register Region * 0x1c00_0000..0x1dff_ffff 1MB NAND Flash Region * 0x1e00_0000..0x1dff_ffff 1MB Serial Flash Region * 0x4000_0000..0x47ff_ffff 128MB PCIe 1 Address Match Region * 0x4800_0000..0x4fff_ffff 128MB PCIe 2 Address Match Region * 0x8000_0000..0xbfff_ffff 1024MB DDR2/3 DRAM Memory Region * 0xfffd_0000..0xfffe_ffff 128KB Internal Boot ROM Region * 0xffff_0000..0xffff_043f 1088B Internal SKU ROM Region * 0xffff_1000..0xffff_1fff 4KB Enumeration ROM Register Region */ #define BCM53XX_PCIE0_OWIN_PBASE 0x08000000 #define BCM53XX_PCIE0_OWIN_SIZE 0x04000000 #define BCM53XX_PCIE0_OWIN_MAX 0x08000000 #define BCM53XX_IOREG_PBASE 0x18000000 #define BCM53XX_IOREG_SIZE 0x00200000 #define BCM53XX_ARMCORE_PBASE 0x19000000 #define BCM53XX_ARMCORE_SIZE 0x00100000 #define BCM53XX_NAND_PBASE 0x1c000000 #define BCM53XX_NAND_SIZE 0x01000000 #define BCM53XX_SPIFLASH_PBASE 0x1d000000 #define BCM53XX_SPIFLASH_SIZE 0x01000000 #define BCM53XX_PCIE1_OWIN_PBASE 0x40000000 #define BCM53XX_PCIE1_OWIN_SIZE 0x04000000 #define BCM53XX_PCIE1_OWIN_MAX 0x08000000 #define BCM53XX_PCIE2_OWIN_PBASE 0x48000000 #define BCM53XX_PCIE2_OWIN_SIZE 0x04000000 #define BCM53XX_PCIE2_OWIN_MAX 0x08000000 #define BCM53XX_ROM_REGION_PBASE 0xfff00000 #define BCM53XX_ROM_REGION_SIZE 0x00100000 #define BCM53XX_IO_SIZE (BCM53XX_IOREG_SIZE \ + BCM53XX_ARMCORE_SIZE \ + BCM53XX_PCIE0_OWIN_SIZE \ + BCM53XX_PCIE1_OWIN_SIZE \ + BCM53XX_PCIE2_OWIN_SIZE \ + BCM53XX_ROM_REGION_SIZE) #define BCM53XX_REF_CLK (25*1000*1000) #define CCA_UART_FREQ BCM53XX_REF_CLK /* Chip Common A */ #define CCA_MISC_BASE 0x000000 #define CCA_MISC_SIZE 0x001000 #define CCA_UART0_BASE 0x000300 #define CCA_UART1_BASE 0x000400 /* Chip Common B */ #define CCB_BASE 0x000000 #ifdef BCM5301X #define CCB_SIZE 0x030000 #define PWM_BASE 0x002000 #define MII_BASE 0x003000 #define RNG_BASE 0x004000 #define TIMER0_BASE 0x005000 #define TIMER1_BASE 0x006000 #define SRAB_BASE 0x007000 #define UART2_BASE 0x008000 #define SMBUS1_BASE 0x009000 #define CRU_BASE 0x00b000 #define DMU_BASE 0x00c000 #elif defined(BCM563XX) #define CCB_SIZE 0x040000 #define GPIO_BASE 0x030000 #define PWM_BASE 0x031000 #define MII_BASE 0x032000 #define RNG_BASE 0x033000 #define TIMER0_BASE 0x034000 #define TIMER1_BASE 0x035000 #define UART2_BASE 0x037000 #define SMBUS0_BASE 0x038000 #define WDT_BASE 0x039000 #define PKA_BASE 0x03a000 #define SMBUS1_BASE 0x03b000 #define CRU_BASE 0x03e000 #define DMU_BASE 0x03f000 #endif #define DDR_BASE 0x010000 #define PCIE0_BASE 0x012000 #define PCIE1_BASE 0x013000 #ifdef BCM5301X #define PCIE2_BASE 0x014000 #define SDIO_BASE 0x020000 #define EHCI_BASE 0x021000 #define OHCI_BASE 0x022000 #define GMAC0_BASE 0x024000 #define GMAC1_BASE 0x025000 #define GMAC2_BASE 0x026000 #define GMAC3_BASE 0x027000 #define NAND_BASE 0x028000 #define QSPI_BASE 0x029000 #define I2S_BASE 0x02A000 #define DMAC_BASE 0x02C000 #endif #ifdef BCM563XX #define DMAC_BASE 0x020000 #define GMAC0_BASE 0x022000 #define GMAC1_BASE 0x023000 #define NAND_BASE 0x026000 #define QSPI_BASE 0x027000 #define EHCI_BASE 0x02A000 #define OHCI_BASE 0x02B000 #endif #define IDM_BASE 0x100000 #define IDM_SIZE 0x100000 /* Chip Common A */ #ifdef CCA_PRIVATE #define MISC_CHIPID 0x000 #define CHIPID_REV __BITS(19,16) #define CHIPID_ID __BITS(15,0) #define ID_BCM53010 0xcf12 // 53010 #define ID_BCM53011 0xcf13 // 53011 #define ID_BCM53012 0xcf14 // 53012 #define ID_BCM53013 0xcf15 // 53013 #define ID_BCM56340 0xdc14 // 56340 #define MISC_CAPABILITY 0x004 #define CAPABILITY_JTAG_PRESENT __BIT(22) #define CAPABILITY_UART_CLKSEL __BITS(4,3) #define UART_CLKSEL_REFCLK 0 #define UART_CLKSEL_INTCLK 1 /* 2 & 3 are reserved */ #define CAPABILITY_BIG_ENDIAN __BIT(2) #define CAPABILITY_UART_COUNT __BITS(1,0) #define MISC_CORECTL 0x008 #define CORECTL_UART_CLK_EN __BIT(3) #define CORECTL_GPIO_ASYNC_INT_EN __BIT(2) #define CORECTL_UART_CLK_OVERRIDE __BIT(0) #define MISC_INTSTATUS 0x020 #define INTSTATUS_WDRESET __BIT(31) // WO2C #define INTSTATUS_UARTINT __BIT(6) // RO #define INTSTATUS_GPIOINT __BIT(0) // RO #define MISC_INTMASK 0x024 #define INTMASK_UARTINT __BIT(6) // 1 = enabled #define INTMASK_GPIOINT __BIT(0) // 1 = enabled /* Only bits [23:0] are used in the GPIO registers */ #define GPIO_INPUT 0x060 // RO #define GPIO_OUT 0x064 #define GPIO_OUTEN 0x068 #define GPIO_INTPOLARITY 0x070 // 1 = active low #define GPIO_INTMASK 0x074 // 1 = enabled (level) #define GPIO_EVENT 0x078 // W1C, 1 = edge seen #define GPIO_EVENT_INTMASK 0x07c // 1 = enabled (edge) #define GPIO_EVENT_INTPOLARITY 0x084 // 1 = falling #define GPIO_TIMER_VAL 0x088 #define TIMERVAL_ONCOUNT __BITS(31,16) #define TIMERVAL_OFFCOUNT __BITS(15,0) #define GPIO_TIMER_OUTMASK 0x08c #define GPIO_DEBUG_SEL 0x0a8 #define MISC_WATCHDOG 0x080 // 0 disables, 1 resets #define MISC_CLKDIV 0x0a4 #define CLKDIV_JTAG_MASTER_CLKDIV __BITS(13,9) #define CLKDIV_UART_CLKDIV __BITS(7,1) #define MISC_CAPABILITY2 0x0ac #define CAPABILITY2_GSIO_PRESENT __BIT(1) // SPI exists #define MISC_GSIOCTL 0x0e4 #define GSIOCTL_STARTBUSY __BIT(31) #define GSIOCTL_GSIOMODE __BIT(30) // 0 = SPI #define GSIOCTL_ERROR __BIT(23) #define GSIOCTL_BIGENDIAN __BIT(22) #define GSIOCTL_GSIOGO __BIT(21) #define GSIOCTL_NUM_DATABYTES __BITS(17,16) // actual is + 1 #define GSIOCTL_NUM_WAITCYCLES __BITS(15,14) // actual is + 1 #define GSIOCTL_NUM_ADDRESSBYTES __BITS(13,12) // actual is + 1 #define GSIOCTL_GSIOCODE __BITS(10,8) #define GSIOCODE_OP_RD1DATA 0 #define GSIOCODE_OP_WRADDR_RDADDR 1 #define GSIOCODE_OP_WRADDR_XFRDATA 2 #define GSIOCODE_OP_WRADDR_WAIT_XFRDATA 3 #define GSIOCODE_XFRDATA 4 #define GSIOCTL_GSIOOP __BITS(7,0) #define MISC_GSIOADDRESS 0x0e8 #define MISC_GSIODATA 0x0ec #define MISC_CLKDIV2 0x0f0 #define CLKDIV2_GSIODIV __BITS(20,5) #define MISC_EROM_PTR_OFFSET 0x0fc #endif /* CCA_PRIVATE */ /* * UART0 & 1 use the standard 16550 register layout (normal 1 byte stride) * and have 64-byte FIFOs */ /* TIMER0 & 1 are implemented by the dtimer driver */ #define TIMER_FREQ BCM53XX_REF_CLK #ifdef SRAB_PRIVATE #define SRAB_CMDSTAT 0x002c #define SRA_PAGE __BITS(31,24) #define SRA_OFFSET __BITS(23,16) #define SRA_PAGEOFFSET __BITS(31,16) #define SRA_RST __BIT(2) #define SRA_WRITE __BIT(1) #define SRA_GORDYN __BIT(0) #define SRAB_WDH 0x0030 #define SRAB_WDL 0x0034 #define SRAB_RDH 0x0038 #define SRAB_RDL 0x003c #endif #ifdef MII_PRIVATE #define MII_INTERNAL 0x0038003 /* internal phy bitmask */ #define MIIMGT 0x000 #define MIIMGT_BYP __BIT(10) #define MIIMGT_EXT __BIT(9) #define MIIMGT_BSY __BIT(8) #define MIIMGT_PRE __BIT(7) #define MIIMGT_MDCDIV __BITS(6,0) #define MIICMD 0x004 #define MIICMD_SB __BITS(31,30) #define MIICMD_SB_DEF __SHIFTIN(1, MIICMD_SB) #define MIICMD_OP __BITS(29,28) #define MIICMD_OP_RD __SHIFTIN(2, MIICMD_OP) #define MIICMD_OP_WR __SHIFTIN(1, MIICMD_OP) #define MIICMD_PHY __BITS(27,23) #define MIICMD_REG __BITS(22,18) #define MIICMD_TA __BITS(17,16) #define MIICMD_TA_DEF __SHIFTIN(2, MIICMD_TA) #define MIICMD_DATA __BITS(15,0) #define MIICMD_RD_DEF (MIICMD_SB_DEF|MIICMD_OP_RD|MIICMD_TA_DEF) #define MIICMD_WR_DEF (MIICMD_SB_DEF|MIICMD_OP_WR|MIICMD_TA_DEF) #define MIICMD__PHYREG(p,r) (__SHIFTIN(p,MIICMD_PHY)|__SHIFTIN(r,MIICMD_REG)) #define MIICMD_RD(p,r) (MIICMD_RD_DEF|MIICMD__PHYREG((p),(r))) #define MIICMD_WR(p,r,v) (MIICMD_WR_DEF|MIICMD__PHYREG((p),(r))|(v)) #endif /* MII_PRIVATE */ #ifdef RNG_PRIVATE #define RNG_CTRL 0x000 #define RNG_COMBLK2_OSC_DIS __BITS(27,22) #define RNG_COMBLK1_OSC_DIS __BITS(21,16) #define RNG_ICLK_BYP_DIV_CNT __BITS(15,8) #define RNG_JCLK_BYP_SRC __BIT(5) #define RNG_JCLK_BYP_SEL __BIT(4) #define RNG_RBG2X __BIT(1) #define RNG_RBGEN __BIT(0) #define RNG_STATUS 0x004 #define RNG_VAL __BITS(31,24) #define RNG_WARM_CNT __BITS(19,0) #define RNG_DATA 0x008 #define RNG_FF_THRESHOLD 0x00c #define RNG_INT_MASK 0x010 #define RNG_INT_OFF __BIT(0) #endif /* RNG_PRIVATE */ #ifdef UART2_PRIVATE /* * UART2 (ChipCommonB) uses a 4-byte stride and 16-byte FIFO. * Its frequency is the APB clock. */ #define UART2_LPDLL 0x020 #define UART2_LPDLH 0x024 #endif #ifdef CRU_PRIVATE #define CRU_CONTROL 0x000 #define CRUCTL_QSPI_CLK_SEL __BITS(2,1) #define QSPI_CLK_25MHZ 0 // iproc_ref_clk #define QSPI_CLK_50MHZ 1 // iproc_sdio_clk / 4 #define QSPI_CLK_31dot25MHZ 2 // iproc_clk250 / 8 #define QSPI_CLK_62dot5MHZ 3 // iproc_clk250 / 4 #define CRUCTL_SW_RESET __BIT(0) #define CRU_GENPLL_CONTROL5 0x1154 #define GENPLL_CONTROL5_NDIV_INT __BITS(29,20) // = (n ? n : 1024) #define GENPLL_CONTROL5_NDIV_FRAC __BITS(19,0) // = 1 / n #define CRU_GENPLL_CONTROL6 0x1158 #define GENPLL_CONTROL6_PDIV __BITS(26,24) // = (n ? n : 8) #define GENPLL_CONTROL6_CH0_MDIV __BITS(23,16) // = (n ? n : 256), clk_mac #define GENPLL_CONTROL6_CH1_MDIV __BITS(15,8) // = (n ? n : 256), clk_robo #define GENPLL_CONTROL6_CH2_MDIV __BITS(7,0) // = (n ? n : 256), clf_usb2 #define CRU_GENPLL_CONTROL7 0x115c #define GENPLL_CONTROL7_CH3_MDIV __BITS(23,16) // = (n ? n : 256), clk_iproc #define USB2_REF_CLK (1920*1000*1000) #define CRU_USB2_CONTROL 0x1164 #define USB2_CONTROL_KA __BITS(24,22) #define USB2_CONTROL_KI __BITS(31,19) #define USB2_CONTROL_KP __BITS(18,15) #define USB2_CONTROL_PDIV __BITS(14,12) // = (n ? n : 8) #define USB2_CONTROL_NDIV_INT __BITS(11,2) // = (n ? n : 1024) #define USB2_CONTROL_PLL_PCIEUSB3_RESET __BIT(1) // inverted 1=normal #define USB2_CONTROL_PLL_USB2_RESET __BIT(0) // inverted 1=normal #define CRU_CLKSET_KEY 0x1180 #define CRU_CLKSET_KEY_MAGIC 0xea68 #define CRU_GPIO_SELECT 0x11c0 // CRU GPIO Select #define CRU_GPIO_DRIVE_SEL2 0x11c4 #define CRU_GPIO_DRIVE_SEL1 0x11c8 #define CRU_GPIO_DRIVE_SEL0 0x11cc #define CRU_GPIO_INPUT_DISABLE 0x11d0 #define CRU_GPIO_HYSTERESIS 0x11d4 #define CRU_GPIO_SLEW_RATE 0x11d8 #define CRU_GPIO_PULL_UP 0x11dc #define CRU_GPIO_PULL_DOWN 0x11e0 #define CRU_STRAPS_CONTROL 0x12a0 #define STRAP_BOOT_DEV __BITS(17,16) #define STRAP_NAND_TYPE __BITS(15,12) #define STRAP_NAND_PAGE __BITS(11,10) #define STRAP_DDR3 __BIT(9) #define STRAP_P5_VOLT_15 __BIT(8) #define STRAP_P5_MODE __BITS(7,6) #define STRAP_PCIE0_MODE __BIT(5) #define STRAP_USB3_SEL __BIT(4) #define STRAP_EX_EXTCLK __BIT(3) #define STRAP_HW_FWDG_EN __BIT(2) #define STRAP_LED_SERIAL_MODE __BIT(1) #define STRAP_BISR_BYPASS_AUTOLOAD __BIT(0) #endif /* CRU_PRIVATE */ #ifdef DMU_PRIVATE #define DMU_LCPLL_CONTROL0 0x100 #define DMU_LCPLL_CONTROL1 0x104 #define LCPLL_CONTROL1_PDIV __BITS(30,28) // = (n ? n : 8) #define LCPLL_CONTROL1_NDIV_INT __BITS(27,20) // = (n ? n : 256) #define LCPLL_CONTROL1_NDIV_FRAC __BITS(19,0) // = 1 / n /* * SYS_CLK = (1 / pdiv) * (ndiv_int + (ndiv_frac / 0x40000000)) x F(ref) */ #define DMU_LCPLL_CONTROL2 0x108 #define LCPLL_CONTROL2_CH0_MDIV __BITS(31,24) // = (n ? n : 256), clk_pcie_ref #define LCPLL_CONTROL2_CH1_MDIV __BITS(23,16) // = (n ? n : 256), clk_sdio #define LCPLL_CONTROL2_CH2_MDIV __BITS(15,8) // = (n ? n : 256), clk_ddr #define LCPLL_CONTROL2_CH3_MDIV __BITS(7,0) // = (n ? n : 256), clf_dft #define DMU_CRU_RESET 0x200 #define DMU_CRU_RESET_IPROC __BIT(1) #define DMU_CRU_RESET_CMICD __BIT(0) #endif /* DMU_PRIVATE */ #ifdef DDR_PRIVATE /* * DDR CTL register has such inspired names. */ #define DDR_CTL_01 0x004 #define CTL_01_MAX_CHIP_SEL __BITS(18,16) // not documented as such #define CTL_01_MAX_COL __BITS(11,8) #define CTL_01_MAX_ROW __BITS(4,0) #define DDR_CTL_82 0x148 #define CTL_82_COL_DIFF __BITS(26,24) #define CTL_82_ROW_DIFF __BITS(18,16) #define CTL_82_BANK_DIFF __BITS(9,8) #define CTL_82_ZQCS_ROTATE __BIT(0) #define DDR_CTL_86 0x158 #define CTL_86_CS_MAP __BITS(27,24) #define CTL_86_INHIBIT_DRAM_CMD __BIT(16) #define CTL_86_DIS_RD_INTRLV __BIT(8) #define CTL_86_NUM_QENT_ACT_DIS __BITS(2,0) #define DDR_CTL_87 0x15c #define CTL_87_IN_ORDER_ACCEPT __BIT(24) #define CTL_87_Q_FULLNESS __BITS(18,16) #define CTL_87_REDUC __BIT(8) #define CTL_87_BURST_ON_FLY_BIT __BITS(3,0) #define DDR_PHY_CTL_PLL_STATUS 0x810 #define PLL_STATUS_LOCK_LOST __BIT(26) #define PLL_STATUS_MHZ __BITS(25,14) #define PLL_STATUS_CLOCKING_4X __BIT(13) #define PLL_STATUS_STATUS __BITS(12,1) #define PLL_STATUS_LOCK __BIT(0) #define DDR_PHY_CTL_PLL_DIVIDERS 0x81c #define PLL_DIVIDERS_POST_DIV __BITS(13,11) #define PLL_DIVIDERS_PDIV __BITS(10,8) // 4x: (n ? n : 8), n = n - 4, 4x #define PLL_DIVIDERS_NDIV __BITS(7,0) #endif /* DDR_PRIVATE */ #ifdef PCIE_PRIVATE #define PCIE_CLK_CONTROL 0x000 #define PCIE_RC_AXI_CONFIG 0x100 #define PCIE_AWCACHE_CONFIG __BITS(17,14) #define PCIE_AWUSER_CONFIG __BITS(13,9) #define PCIE_ARCACHE_CONFIG __BITS(8,5) #define PCIE_ARUSER_CONFIG __BITS(4,0) #define PCIE_CFG_IND_ADDR 0x120 #define CFG_IND_ADDR_FUNC __BITS(15,13) #define CFG_IND_ADDR_LAYER __BITS(12,11) #define CFG_IND_ADDR_REG __BITS(10,2) #define PCIE_CFG_IND_DATA 0x124 #define PCIE_CFG_ADDR 0x1f8 #define CFG_ADDR_BUS __BITS(27,20) #define CFG_ADDR_DEV __BITS(19,15) #define CFG_ADDR_FUNC __BITS(14,12) #define CFG_ADDR_REG __BITS(11,2) #define CFG_ADDR_TYPE __BITS(1,0) #define CFG_ADDR_TYPE0 __SHIFTIN(0, CFG_ADDR_TYPE) #define CFG_ADDR_TYPE1 __SHIFTIN(1, CFG_ADDR_TYPE) #define PCIE_CFG_DATA 0x1fc #define PCIE_EQ_PAGE 0x200 #define PCIE_MSI_PAGE 0x204 #define PCIE_MSI_INTR_EN 0x208 #define PCIE_MSI_CTRL_0 0x210 #define PCIE_MSI_CTRL_1 0x214 #define PCIE_MSI_CTRL_2 0x218 #define PCIE_MSI_CTRL_3 0x21c #define PCIE_MSI_CTRL_4 0x220 #define PCIE_MSI_CTRL_5 0x224 #define PCIE_SYS_EQ_HEAD_0 0x250 #define PCIE_SYS_EQ_TAIL_0 0x254 #define PCIE_SYS_EQ_HEAD_1 0x258 #define PCIE_SYS_EQ_TAIL_1 0x25c #define PCIE_SYS_EQ_HEAD_2 0x260 #define PCIE_SYS_EQ_TAIL_2 0x264 #define PCIE_SYS_EQ_HEAD_3 0x268 #define PCIE_SYS_EQ_TAIL_3 0x26c #define PCIE_SYS_EQ_HEAD_4 0x270 #define PCIE_SYS_EQ_TAIL_4 0x274 #define PCIE_SYS_EQ_HEAD_5 0x278 #define PCIE_SYS_EQ_TAIL_5 0x27c #define PCIE_SYS_RC_INTX_EN 0x330 #define PCIE_SYS_RC_INTX_CSR 0x334 #define PCIE_CFG000_BASE 0x400 #define PCIE_FUNC0_IMAP0_0 0xc00 #define PCIE_FUNC0_IMAP0_1 0xc04 #define PCIE_FUNC0_IMAP0_2 0xc08 #define PCIE_FUNC0_IMAP0_3 0xc0c #define PCIE_FUNC0_IMAP0_4 0xc10 #define PCIE_FUNC0_IMAP0_5 0xc14 #define PCIE_FUNC0_IMAP0_6 0xc18 #define PCIE_FUNC0_IMAP0_7 0xc1c #define PCIE_FUNC0_IMAP1 0xc80 #define PCIE_FUNC1_IMAP1 0xc88 #define PCIE_FUNC0_IMAP2 0xcc0 #define PCIE_FUNC1_IMAP2 0xcc8 #define PCIE_IARR_0_LOWER 0xd00 #define PCIE_IARR_0_UPPER 0xd04 #define PCIE_IARR_1_LOWER 0xd08 #define PCIE_IARR_1_UPPER 0xd0c #define PCIE_IARR_2_LOWER 0xd10 #define PCIE_IARR_2_UPPER 0xd14 #define PCIE_OARR_0 0xd20 #define PCIE_OARR_1 0xd28 #define PCIE_OARR_ADDR __BITS(31,26) #define PCIE_OMAP_0_LOWER 0xd40 #define PCIE_OMAP_0_UPPER 0xd44 #define PCIE_OMAP_1_LOWER 0xd48 #define PCIE_OMAP_1_UPPER 0xd4c #define PCIE_OMAP_ADDRL __BITS(31,26) #define PCIE_FUNC1_IARR_1_SIZE 0xd58 #define PCIE_FUNC1_IARR_2_SIZE 0xd5c #define PCIE_MEM_CONTROL 0xf00 #define PCIE_MEM_ECC_ERR_LOG_0 0xf04 #define PCIE_MEM_ECC_ERR_LOG_1 0xf08 #define PCIE_LINK_STATUS 0xf0c #define PCIE_PHYLINKUP __BIT(3) #define PCIE_DL_ACTIVE __BIT(2) #define PCIE_RX_LOS_TIMEOUT __BIT(1) #define PCIE_LINK_IN_L1 __BIT(0) #define PCIE_STRAP_STATUS 0xf10 #define STRAP_PCIE_REPLAY_BUF_TM __BITS(8,4) #define STRAP_PCIE_USER_FOR_CE_GEN1 __BIT(3) #define STRAP_PCIE_USER_FOR_CE_1LANE __BIT(2) #define STRAP_PCIE_IF_ENABLE __BIT(1) #define STRAP_PCIE_USER_RC_MODE __BIT(0) #define PCIE_RESET_STATUS 0xf14 #define PCIE_RESET_ENABLE_IN_PCIE_LINK_DOWN 0xf18 #define PCIE_MISC_INTR_EN 0xf1c #define PCIE_TX_DEBUG_CFG 0xf20 #define PCIE_ERROR_INTR_EN 0xf30 #define PCIE_ERROR_INTR_CLR 0xf34 #define PCIE_ERROR_INTR_STS 0xf38 // PCIE_SYS_MSI_INTR_EN #define MSI_INTR_EN_EQ_5 __BIT(5) #define MSI_INTR_EN_EQ_4 __BIT(4) #define MSI_INTR_EN_EQ_3 __BIT(3) #define MSI_INTR_EN_EQ_2 __BIT(2) #define MSI_INTR_EN_EQ_1 __BIT(1) #define MSI_INTR_EN_EQ_0 __BIT(0) // PCIE_SYS_MSI_CTRL #define INT_N_DELAY __BITS(9,6) #define INT_N_EVENT __BITS(1,1) #define EQ_ENABLE __BIT(0) // PCIE_SYS_EQ_HEAD #define HEAD_PTR __BITS(5,0) // PCIE_SYS_EQ_TAIL #define EQ_OVERFLOW __BIT(6) #define TAIL_PTR __BITS(5,0) // PCIE_SYS_RC_INTRX_EN #define RC_EN_INTD __BIT(3) #define RC_EN_INTC __BIT(2) #define RC_EN_INTB __BIT(1) #define RC_EN_INTA __BIT(0) // PCIE_SYS_RC_INTRX_CSR #define RC_INTD __BIT(3) #define RC_INTC __BIT(2) #define RC_INTB __BIT(1) #define RC_INTA __BIT(0) // PCIE_IARR_0_LOWER / UPPER #define IARR0_ADDR __BIT(31,15) #define IARR0_VALID __BIT(0) // PCIE_IARR_1_LOWER / UPPER #define IARR1_ADDR __BIT(31,20) #define IARR1_SIZE __BIT(7,0) // PCIE_IARR_2_LOWER / UPPER #define IARR2_ADDR __BIT(31,20) #define IARR2_SIZE __BIT(7,0) // PCIE_MISC_INTR_EN #define INTR_EN_PCIE_ERR_ATTN __BIT(2) #define INTR_EN_PAXB_ECC_2B_ATTN __BIT(1) #define INTR_EN_PCIE_IN_WAKE_B __BIT(0) // PCIE_ERR_INTR_{EN,CLR,STS} #define PCIE_OVERFLOW_UNDERFLOW_INTR __BIT(10) #define PCIE_AXI_MASTER_RRESP_SLV_ERR_INTR __BIT(9) #define PCIE_AXI_MASTER_RRESP_DECERR_INTR __BIT(8) #define PCIE_ECRC_ERR_INTR __BIT(7) #define PCIE_CMPL_TIMEROUT_INTR __BIT(6) #define PCIE_ERR_ATTN_INTR __BIT(5) #define PCIE_IN_WAKE_B_INTR __BIT(4) #define PCIE_REPLAY_BUF_2B_ECC_ERR_INTR __BIT(3) #define PCIE_RD_CMPL_BUF_1_2B_ECC_ERR_INTR __BIT(2) #define PCIE_RD_CMPL_BUF_0_2B_ECC_ERR_INTR __BIT(1) #define PCIE_WR_DATA_BUF_2B_ECC_ERR_INTR __BIT(0) #define REGS_DEVICE_CAPACITY 0x04d4 #define REGS_LINK_CAPACITY 0x03dc #define REGS_TL_CONTROL_0 0x0800 #define REGS_DL_STATUS 0x1048 #endif /* PCIE_PRIVATE */ #define ARMCORE_SCU_BASE 0x20000 /* CBAR is 19020000 */ #define ARMCORE_L2C_BASE 0x22000 #ifdef ARMCORE_PRIVATE #define ARMCORE_CLK_POLICY_FREQ 0x008 #define CLK_POLICY_FREQ_PRIVED __BIT(31) #define CLK_POLICY_FREQ_POLICY3 __BITS(26,24) #define CLK_POLICY_FREQ_POLICY2 __BITS(18,16) #define CLK_POLICY_FREQ_POLICY1 __BITS(10,8) #define CLK_POLICY_FREQ_POLICY0 __BITS(2,0) #define CLK_POLICY_REF_CLK 0 // 25 MHZ #define CLK_POLICY_SYS_CLK 1 // sys clk (200MHZ) #define CLK_POLICY_ARM_PLL_CH0 6 // slow clock #define CLK_POLICY_ARM_PLL_CH1 7 // fast clock #define ARMCORE_CLK_APB_DIV 0xa10 #define CLK_APB_DIV_PRIVED __BIT(31) #define CLK_APB_DIV_VALUE __BITS(1,0) // n = n + 1 #define ARMCORE_CLK_APB_DIV_TRIGGER 0xa10 #define CLK_APB_DIV_TRIGGER_PRIVED __BIT(31) #define CLK_APB_DIV_TRIGGER_OVERRIDE __BIT(0) #define ARMCORE_CLK_PLLARMA 0xc00 #define CLK_PLLARMA_PDIV __BITS(26,24) // = (n ? n : 16(?)) #define CLK_PLLARMA_NDIV_INT __BITS(17,8) // = (n ? n : 1024) #define ARMCORE_CLK_PLLARMB 0xc04 #define CLK_PLLARMB_NDIV_FRAC __BITS(19,0) // = 1 / n #endif #ifdef IDM_PRIVATE #define IDM_ARMCORE_M0_BASE 0x00000 #define IDM_PCIE_M0_BASE 0x01000 #define IDM_PCIE_M1_BASE 0x02000 #define IDM_PCIE_M2_BASE 0x03000 #define IDM_USB3_BASE 0x05000 #define IDM_ARMCORE_S1_BASE 0x06000 #define IDM_ARMCORE_S0_BASE 0x07000 #define IDM_DDR_S1_BASE 0x08000 #define IDM_DDR_S2_BASE 0x09000 #define IDM_ROM_S0_BASE 0x0d000 #define IDM_AMAC0_BASE 0x10000 #define IDM_AMAC1_BASE 0x11000 #define IDM_AMAC2_BASE 0x12000 #define IDM_AMAC3_BASE 0x13000 #define IDM_DMAC_M0_BASE 0x14000 #define IDM_USB2_BASE 0x15000 #define IDM_SDIO_BASE 0x16000 #define IDM_I2S_M0_BASE 0x17000 #define IDM_A9JTAG_M0_BASE 0x18000 #ifdef BCM5301X #define IDM_NAND_BASE 0x1a000 #define IDM_QSPI_BASE 0x1b000 #endif #ifdef BCM563XX #define IDM_NAND_BASE 0x1b000 #define IDM_QSPI_BASE 0x1c000 #endif #define IDM_APBX_BASE 0x21000 #define IDM_IO_CONTROL_DIRECT 0x0408 #define IDM_IO_STATUS 0x0500 #define IDM_RESET_CONTROL 0x0800 #define IDM_RESET_STATUS 0x0804 #define IDM_INTERRUPT_STATUS 0x0a00 #define IO_CONTROL_DIRECT_ARUSER __BITS(29,25) #define IO_CONTROL_DIRECT_AWUSER __BITS(24,20) #define IO_CONTROL_DIRECT_ARCACHE __BITS(19,16) #define IO_CONTROL_DIRECT_AWCACHE __BITS(10,7) #define AXCACHE_WA __BIT(3) #define AXCACHE_RA __BIT(2) #define AXCACHE_C __BIT(1) #define AXCACHE_B __BIT(0) #define IO_CONTROL_DIRECT_UARTCLKSEL __BIT(17) #define IO_CONTROL_DIRECT_CLK_250_SEL __BIT(6) #define IO_CONTROL_DIRECT_DIRECT_GMII_MODE __BIT(5) #define IO_CONTROL_DIRECT_TX_CLK_OUT_INVERT_EN __BIT(4) #define IO_CONTROL_DIRECT_DEST_SYNC_MODE_EN __BIT(3) #define IO_CONTROL_DIRECT_SOURCE_SYNC_MODE_EN __BIT(2) #define IO_CONTROL_DIRECT_CLK_GATING_EN __BIT(0) #define RESET_CONTROL_RESET __BIT(0) #endif /* IDM_PRIVATE */ #ifdef USBH_PRIVATE #define USBH_PHY_CTRL_P0 0x200 #define USBH_PHY_CTRL_P1 0x204 #define USBH_PHY_CTRL_INIT 0x3ff #endif #ifdef GMAC_PRIVATE struct gmac_txdb { uint32_t txdb_flags; uint32_t txdb_buflen; uint32_t txdb_addrlo; uint32_t txdb_addrhi; }; #define TXDB_FLAG_SF __BIT(31) // Start oF Frame #define TXDB_FLAG_EF __BIT(30) // End oF Frame #define TXDB_FLAG_IC __BIT(29) // Interrupt on Completion #define TXDB_FLAG_ET __BIT(28) // End Of Table struct gmac_rxdb { uint32_t rxdb_flags; uint32_t rxdb_buflen; uint32_t rxdb_addrlo; uint32_t rxdb_addrhi; }; #define RXDB_FLAG_SF __BIT(31) // Start oF Frame (ignored) #define RXDB_FLAG_EF __BIT(30) // End oF Frame (ignored) #define RXDB_FLAG_IC __BIT(29) // Interrupt on Completion #define RXDB_FLAG_ET __BIT(28) // End Of Table #define RXSTS_FRAMELEN __BITS(15,0) // # of bytes (including padding) #define RXSTS_PKTTYPE __BITS(17,16) #define RXSTS_PKTTYPE_UC 0 // Unicast #define RXSTS_PKTTYPE_MC 1 // Multicast #define RXSTS_PKTTYPE_BC 2 // Broadcast #define RXSTS_VLAN_PRESENT __BIT(18) #define RXSTS_CRC_ERROR __BIT(19) #define RXSTS_OVERSIZED __BIT(20) #define RXSTS_CTF_HIT __BIT(21) #define RXSTS_CTF_ERROR __BIT(22) #define RXSTS_PKT_OVERFLOW __BIT(23) #define RXSTS_DESC_COUNT __BITS(27,24) // # of descriptors - 1 #define GMAC_DEVCONTROL 0x000 #define ENABLE_DEL_G_TXC __BIT(21) #define ENABLE_DEL_G_RXC __BIT(20) #define TXC_DRNG __BITS(19,18) #define RXC_DRNG __BITS(17,16) #define TXQ_FLUSH __BIT(8) #define NWAY_AUTO_POLL_EN __BIT(7) #define FLOW_CTRL_MODE __BITS(6,5) #define MIB_RD_RESET_EN __BIT(4) #define RGMII_LINK_STATUS_SEL __BIT(3) #define CPU_FLOW_CTRL_ON __BIT(2) #define RXQ_OVERFLOW_CTRL_SEL __BIT(1) #define TXARB_STRICT_MODE __BIT(0) #define GMAC_DEVSTATUS 0x004 #define GMAC_BISTSTATUS 0x00c #define GMAC_INTSTATUS 0x020 #define GMAC_INTMASK 0x024 #define TXQECCUNCORRECTED __BIT(31) #define TXQECCCORRECTED __BIT(30) #define RXQECCUNCORRECTED __BIT(29) #define RXQECCCORRECTED __BIT(28) #define XMTINT_3 __BIT(27) #define XMTINT_2 __BIT(26) #define XMTINT_1 __BIT(25) #define XMTINT_0 __BIT(24) #define RCVINT __BIT(16) #define XMTUF __BIT(15) #define RCVFIFOOF __BIT(14) #define RCVDESCUF __BIT(13) #define DESCPROTOERR __BIT(12) #define DATAERR __BIT(11) #define DESCERR __BIT(10) #define INT_SW_LINK_ST_CHG __BIT(8) #define INT_TIMEOUT __BIT(7) #define MIB_TX_INT __BIT(6) #define MIB_RX_INT __BIT(5) #define MDIOINT __BIT(4) #define NWAYLINKSTATINT __BIT(3) #define TXQ_FLUSH_DONEINT __BIT(2) #define MIB_TX_OVERFLOW __BIT(1) #define MIB_RX_OVERFLOW __BIT(0) #define GMAC_GPTIMER 0x028 #define GMAC_INTRCVLAZY 0x100 #define INTRCVLAZY_FRAMECOUNT __BITS(31,24) #define INTRCVLAZY_TIMEOUT __BITS(23,0) #define GMAC_FLOWCNTL_TH 0x104 #define GMAC_TXARB_WRR_TH 0x108 #define GMAC_GMACIDLE_CNT_TH 0x10c #define GMAC_FIFOACCESSADDR 0x120 #define GMAC_FIFOACCESSBYTE 0x124 #define GMAC_FIFOACCESSDATA 0x128 #define GMAC_PHYACCESS 0x180 #define GMAC_PHYCONTROL 0x188 #define GMAC_TXQCONTROL 0x18c #define GMAC_RXQCONTROL 0x190 #define GMAC_GPIOSELECT 0x194 #define GMAC_GPIOOUTPUTEN 0x198 #define GMAC_TXQRXQMEMORYCONTROL 0x1a0 #define GMAC_MEMORYECCSTATUS 0x1a4 #define GMAC_CLOCKCONTROLSTATUS 0x1e0 #define GMAC_POWERCONTROL 0x1e8 #define GMAC_XMTCONTROL 0x200 #define XMTCTL_PREFETCH_THRESH __BITS(25,24) #define XMTCTL_PREFETCH_CTL __BITS(23,21) #define XMTCTL_BURSTLEN __BITS(20,18) #define XMTCTL_ADDREXT __BITS(17,16) #define XMTCTL_DMA_ACT_INDEX __BIT(13) #define XMTCTL_PARITY_DIS __BIT(11) #define XMTCTL_OUTSTANDING_READS __BITS(7,6) #define XMTCTL_BURST_ALIGN_EN __BIT(5) #define XMTCTL_DMA_LOOPBACK __BIT(2) #define XMTCTL_SUSPEND __BIT(1) #define XMTCTL_ENABLE __BIT(0) #define GMAC_XMTPTR 0x204 #define XMT_LASTDSCR __BITS(11,4) #define GMAC_XMTADDR_LOW 0x208 #define GMAC_XMTADDR_HIGH 0x20c #define GMAC_XMTSTATUS0 0x210 #define XMTSTATE __BITS(31,28) #define XMTSTATE_DIS 0 #define XMTSTATE_ACTIVE 1 #define XMTSTATE_IDLE_WAIT 2 #define XMTSTATE_STOPPED 3 #define XMTSTATE_SUSP_PENDING 4 #define XMT_CURRDSCR __BITS(11,4) #define GMAC_XMTSTATUS1 0x214 #define XMTERR __BITS(31,28) #define XMT_ACTIVEDSCR __BITS(11,4) #define GMAC_RCVCONTROL 0x220 #define RCVCTL_PREFETCH_THRESH __BITS(25,24) #define RCVCTL_PREFETCH_CTL __BITS(23,21) #define RCVCTL_BURSTLEN __BITS(20,18) #define RCVCTL_ADDREXT __BITS(17,16) #define RCVCTL_DMA_ACT_INDEX __BIT(13) #define RCVCTL_PARITY_DIS __BIT(11) #define RCVCTL_OFLOW_CONTINUE __BIT(10) #define RCVCTL_SEPRXHDRDESC __BIT(9) #define RCVCTL_RCVOFFSET __BITS(7,1) #define RCVCTL_ENABLE __BIT(0) #define GMAC_RCVPTR 0x224 #define RCVPTR __BITS(11,4) #define GMAC_RCVADDR_LOW 0x228 #define GMAC_RCVADDR_HIGH 0x22c #define GMAC_RCVSTATUS0 0x230 #define RCVSTATE __BITS(31,28) #define RCVSTATE_DIS 0 #define RCVSTATE_ACTIVE 1 #define RCVSTATE_IDLE_WAIT 2 #define RCVSTATE_STOPPED 3 #define RCVSTATE_SUSP_PENDING 4 #define RCV_CURRDSCR __BITS(11,4) #define GMAC_RCVSTATUS1 0x234 #define RCV_ACTIVEDSCR __BITS(11,4) #define GMAC_TX_GD_OCTETS_LO 0x300 #define UNIMAC_IPG_HD_BPG_CNTL 0x804 #define UNIMAC_COMMAND_CONFIG 0x808 #define RUNT_FILTER_DIS __BIT(30) #define OOB_EFC_EN __BIT(29) #define IGNORE_TX_PAUSE __BIT(28) #define PRBL_ENA __BIT(27) #define RX_ERR_DIS __BIT(26) #define LINE_LOOPBACK __BIT(25) #define NO_LENGTH_CHECK __BIT(24) #define CNTRL_FRM_ENA __BIT(23) #define ENA_EXT_CONFIG __BIT(22) #define EN_INTERNAL_TX_CRS __BIT(21) #define SW_OVERRIDE_RX __BIT(18) #define SW_OVERRIDE_TX __BIT(17) #define MAC_LOOP_CON __BIT(16) #define LOOP_ENA __BIT(15) #define RCS_CORRUPT_URUN_EN __BIT(14) #define SW_RESET __BIT(13) #define OVERFLOW_EN __BIT(12) #define RX_LOW_LATENCY_EN __BIT(11) #define HD_ENA __BIT(10) #define TX_ADDR_INS __BIT(9) #define PAUSE_IGNORE __BIT(8) #define PAUSE_FWD __BIT(7) #define CRC_FWD __BIT(6) #define PAD_EN __BIT(5) #define PROMISC_EN __BIT(4) #define ETH_SPEED __BITS(3,2) #define ETH_SPEED_10 0 #define ETH_SPEED_100 1 #define ETH_SPEED_1000 2 #define ETH_SPEED_2500 3 #define RX_ENA __BIT(1) #define TX_ENA __BIT(0) #define UNIMAC_MAC_0 0x80c // bits 16:47 of macaddr #define UNIMAC_MAC_1 0x810 // bits 0:15 of macaddr #define UNIMAC_FRAME_LEN 0x814 #define UNIMAC_PAUSE_QUANTA 0x818 #define UNIMAC_TX_TS_SEQ_ID 0x83c #define UNIMAC_MAC_MODE 0x844 #define UNIMAC_TAG_0 0x848 #define UNIMAC_TAG_1 0x84c #define UNIMAC_RX_PAUSE_QUANTA_SCALE 0x850 #define UNIMAC_TX_PREAMBLE 0x854 #define UNIMAC_TX_IPG_LENGTH 0x85c #define UNIMAC_PRF_XOFF_TIMER 0x860 #define UNIMAC_UMAC_EEE_CTRL 0x864 #define UNIMAC_MII_EEE_DELAY_ENTRY_TIMER 0x868 #define UNIMAC_GMII_EEE_DELAY_ENTRY_TIMER 0x86c #define UNIMAC_UMAC_EEE_REF_COUNT 0x870 #define UNIMAC_UMAX_RX_PKT_DROP_STATUS 0x878 #define UNIMAC_UMAC_SYMMETRIC_IDLE_THRESHOLD 0x87c // RX IDLE threshold for LPI prediction #define UNIMAC_MII_EEE_WAKE_TIMER 0x880 // MII_EEE Wake timer #define UNIMAC_GMII_EEE_WAKE_TIMER 0x884 // GMII_EEE Wake timer #define UNIMAC_UMAC_REV_ID 0x888 // UNIMAC_REV_ID #define UNIMAC_MAC_PFC_TYPE 0xb00 // Programmable ethertype (GNAT 13440) #define UNIMAC_MAC_PFC_OPCODE 0xb04 // Programmable opcode (GNAT 13440) #define UNIMAC_MAC_PFC_DA_0 0xb08 // lower 32 bits of programmable DA for PPP (GNAT 13897) #define UNIMAC_MAC_PFC_DA_1 0xb0c // upper 16 bits of programmable DA for PPP (GNAT 13897) #define UNIMAC_MACSEC_CNTRL 0xb14 // Miscellaneous control for MACSEC (GNAT 11599,11600,12078,12198) #define UNIMAC_TS_STATUS_CNTRL 0xb18 // Timestamp control/status #define UNIMAC_TX_TS_DATA 0xb1c // Transmit Timestamp data #define UNIMAC_PAUSE_CONTROL 0xb30 // PAUSE frame timer control register #define UNIMAC_FLUSH_CONTROL 0xb34 // Flush enable control register #define UNIMAC_RXFIFO_STAT 0xb38 // RXFIFO status register #define UNIMAC_TXFIFO_STAT 0xb3c // TXFIFO status register #define UNIMAC_MAC_PFC_CTRL 0xb40 // PPP control register #define UNIMAC_MAC_PFC_REFRESH_CTRL 0xb44 // PPP refresh control register #endif /* GMAC_PRIVATE */ #ifdef NAND_PRIVATE #define NAND_REVISION 0x0000 // NAND Revision #define NAND_CMD_START 0x0004 // Nand Flash Command Start #define NAND_CMD_EXT_ADDR 0x0008 // Nand Flash Command Extended Address #define NAND_CMD_ADDR 0x000c // Nand Flash Command Address #define NAND_CMD_END_ADDR 0x0010 // Nand Flash Command End Address #define NAND_INTFC_STATUS 0x0014 // Nand Flash Interface Status #define NAND_CS_NAND_SELECT 0x0018 // Nand Flash CS #define NAND_CS_NAND_XOR 0x001c // Nand Flash EBI #define NAND_LL_OP 0x0020 // Nand Flash Low Level Operation #define NAND_MPLANE_BASE_EXT_ADDR 0x0024 // Nand Flash Multiplane base address #define NAND_MPLANE_BASE_ADDR 0x0028 // Nand Flash Multiplane base address #define NAND_ACC_CONTROL_CS0 0x0050 // Nand Flash Access Control #define NAND_CONFIG_CS0 0x0054 // Nand Flash Config #define NAND_TIMING_1_CS0 0x0058 // Nand Flash Timing Parameters 1 #define NAND_TIMING_2_CS0 0x005c // Nand Flash Timing Parameters 2 #define NAND_ACC_CONTROL_CS1 0x0060 // Nand Flash Access Control #define NAND_CONFIG_CS1 0x0064 // Nand Flash #define NAND_TIMING_1_CS1 0x0068 // Nand Flash Timing Parameters 1 #define NAND_TIMING_2_CS1 0x006c // Nand Flash Timing Parameters 2 #define NAND_CORR_STAT_THRESHOLD 0x00c0 // Correctable Error Reporting Threshold #define NAND_BLK_WR_PROTECT 0x00c8 // Block Write Protect Enable and Size for EBI_CS0b #define NAND_MULTIPLANE_OPCODES_1 0x00cc // Nand Flash Multiplane Customized Opcodes #define NAND_MULTIPLANE_OPCODES_2 0x00d0 // Nand Flash Multiplane Customized Opcodes #define NAND_MULTIPLANE_CTRL 0x00d4 // Nand Flash Multiplane Control #define NAND_UNCORR_ERROR_COUNT 0x00fc // Read Uncorrectable Event Count #define NAND_CORR_ERROR_COUNT 0x0100 // Read Error Count #define NAND_READ_ERROR_COUNT 0x0104 // Read Error Count #define NAND_BLOCK_LOCK_STATUS 0x0108 // Nand Flash Block Lock Status #define NAND_ECC_CORR_EXT_ADDR 0x010c // ECC Correctable Error Extended Address #define NAND_ECC_CORR_ADDR 0x0110 // ECC Correctable Error Address #define NAND_ECC_UNC_EXT_ADDR 0x0114 // ECC Uncorrectable Error Extended Address #define NAND_ECC_UNC_ADDR 0x0118 // ECC Uncorrectable Error Address #define NAND_FLASH_READ_EXT_ADDR 0x011c // Flash Read Data Extended Address #define NAND_FLASH_READ_ADDR 0x0120 // Flash Read Data Address #define NAND_PROGRAM_PAGE_EXT_ADDR 0x0124 // Page Program Extended Address #define NAND_PROGRAM_PAGE_ADDR 0x0128 // Page Program Address #define NAND_COPY_BACK_EXT_ADDR 0x012c // Copy Back Extended Address #define NAND_COPY_BACK_ADDR 0x0130 // Copy Back Address #define NAND_BLOCK_ERASE_EXT_ADDR 0x0134 // Block Erase Extended Address #define NAND_BLOCK_ERASE_ADDR 0x0138 // Block Erase Address #define NAND_INV_READ_EXT_ADDR 0x013c // Flash Invalid Data Extended Address #define NAND_INV_READ_ADDR 0x0140 // Flash Invalid Data Address #define NAND_INIT_STATUS 0x0144 // Initialization status #define NAND_ONFI_STATUS 0x0148 // ONFI Status #define NAND_ONFI_DEBUG_DATA 0x014c // ONFI Debug Data #define NAND_SEMAPHORE 0x0150 // Semaphore #define NAND_FLASH_DEVICE_ID 0x0194 // Nand Flash Device ID #define NAND_FLASH_DEVICE_ID_EXT 0x0198 // Nand Flash Extended Device ID #define NAND_LL_RDDATA 0x019c // Nand Flash Low Level Read Data #define NAND_SPARE_AREA_READ_OFSn(n) (0x0200+4*(n)) // Nand Flash Spare Area Read Bytes #define NAND_SPARE_AREA_WRITE_OFSn(n) (0x0280+4*(n)) // Nand Flash Spare Area Write Bytes 8-11 #define NAND_FLASH_CACHEn(n) (0x0400+4*(n)) // Flash Cache Buffer Read Access #define NAND_DIRECT_READ_RD_MISS 0x0f00 // Interrupt from Nand indicating a read miss on internal memory #define NAND_BLOCK_ERASE_COMPLETE 0x0f04 // Interrupt from Nand indicating block erase #define NAND_COPY_BACK_COMPLETE 0x0f08 // Interrupt from Nand indicating Copy-Back complete. #define NAND_PROGRAM_PAGE_COMPLETE 0x0f0c // Interrupt from nand indicating page program is complete. #define NAND_RO_CTLR_READY 0x0f10 // Interrupt from nand indicating controller ready #define NAND_NAND_RB_B 0x0f14 // Interrupt from nand indicating status of Nand Flash ready_bus pin #define NAND_ECC_MIPS_UNCORR 0x0f18 // Interrupt from Nand indicating Uncorrectable error #define NAND_ECC_MIPS_CORR 0x0f1c // Interrupt from Nand indicating correctable error #define NAND_CMD_START_OPCODE __BITS(28,24) #define NAND_CMD_START_OPCODE_DEFAULT 0 #define NAND_CMD_START_OPCODE_NULL 0 #define NAND_CMD_START_OPCODE_PAGE_READ 1 #define NAND_CMD_START_OPCODE_SPARE_AREA_READ 2 #define NAND_CMD_START_OPCODE_STATUS_READ 3 #define NAND_CMD_START_OPCODE_PROGRAM_PAGE 4 #define NAND_CMD_START_OPCODE_PROGRAM_SPARE_AREA 5 #define NAND_CMD_START_OPCODE_COPY_BACK 6 #define NAND_CMD_START_OPCODE_DEVICE_ID_READ 7 #define NAND_CMD_START_OPCODE_BLOCK_ERASE 8 #define NAND_CMD_START_OPCODE_FLASH_RESET 9 #define NAND_CMD_START_OPCODE_BLOCKS_LOCK 10 #define NAND_CMD_START_OPCODE_BLOCKS_LOCK_DOWN 11 #define NAND_CMD_START_OPCODE_BLOCKS_UNLOCK 12 #define NAND_CMD_START_OPCODE_READ_BLOCKS_LOCK_STATUS 13 #define NAND_CMD_START_OPCODE_PARAMETER_READ 14 #define NAND_CMD_START_OPCODE_PARAMETER_CHANGE_COL 15 #define NAND_CMD_START_OPCODE_LOW_LEVEL_OP 16 #define NAND_CMD_START_OPCODE_PAGE_READ_MULTI 17 #define NAND_CMD_START_OPCODE_STATUS_READ_MULTI 18 #define NAND_CMD_START_OPCODE_PROGRAM_PAGE_MULTI 19 #define NAND_CMD_START_OPCODE_PROGRAM_PAGE_MULTI_CACHE 20 #define NAND_CMD_START_OPCODE_BLOCK_ERASE_MULTI 21 #define NAND_CMD_START_CSEL __BITS(18,16) #define NAND_CMD_EXT_ADDRESS __BITS(15,0) #define BCM_NAND_IDM_IO_CONTROL_APB_LE_MODE_BIT __BIT(24) #endif /* NAND_PRIVATE */ #endif /* _ARM_BROADCOM_BCM53XX_REG_H_ */